{
  "title": "Matte Brick-Format Porcelain",
  "origin": "AI-generated with built-in image_gen; prepared by Locker3d",
  "date": "2026-11-20",
  "resolution": [
    1024,
    1024
  ],
  "license": "CC0-1.0, following the official Locker3d texture policy",
  "prompt": "Generate a new square diffuse texture field of matte greige porcelain subway tiles in a long thin 4:1 running bond. It must be photograph-real and have understated grain, but equally lit, no directional shadows or bright edge rims. IMPORTANT: do not put a grout joint along the outer boundary of the image, and do not frame tiles with white strokes. Start the frame halfway through a full porcelain tile row so that the image top and bottom both show the SAME uniform matte porcelain face material, with the grout row cut phase precisely matching when the image is repeated. Same at left and right, cut through the middle of a porcelain tile face, with equal row geometry and half-offset phase at opposing sides. Four module pitches across, sixteen row pitches down, each module long horizontal and 4:1. Odd rows shift half the width of a tile. There should be no border, no special edge tiles. Sparse fine gray-grout internal joints (2mm suggested) without highlight strokes, diffuse flush grouting shallow enough to read as narrow flat lines. Warm greige ivory tiles, same subdued color at image edges and same within each tile, minimal fine mottling. Perpendicular orthographic studio material photograph, cross-polarized light, uniform sharp focus and exposure, no gradient, no shadow, no reflection, no perspective, no watermark, no text. A full-bleed tileable square material data image only.",
  "maps": [
    {
      "file": "textures/albedo.png",
      "colorSpace": "sRGB",
      "bytes": 1306777,
      "sha256": "c5f590a88e1fc6f56e36d6f27b4b82c86feb6e677a74bbdf7d51f1a7dcd4b3da"
    },
    {
      "file": "textures/normal-gl.png",
      "colorSpace": "Non-Color",
      "bytes": 848935,
      "sha256": "f7da6d2d03d79d2371cb788de14dc1f6adbeb1d8ed7c14d40e84a68fdd02dea7"
    },
    {
      "file": "textures/roughness.png",
      "colorSpace": "Non-Color",
      "bytes": 319102,
      "sha256": "9a175f9105b85896cffa1fa13462ff3a540f7f231931e71eaf0f251b06299875"
    }
  ],
  "method": "Cropped the source to reduce pattern phase mismatch at tile edges. Albedo: periodic-plus-smooth decomposition via FFT Poisson solve to reduce edge mismatch. Normal: periodic multi-scale Gaussian bands, robust contrast normalization, material-specific cavity/joint masks and central-difference tangent-space gradients. Roughness: material preset plus local detail and joint variation. All data channels are estimates, not measured surface response.",
  "limits": "Not a photoscan. No AO, displacement or metallic maps. Generated images are not guaranteed seamless; inspect repetition at your target scale. No measured physical scale; demo scale is illustrative.",
  "edgeDiagnostics": {
    "leftRightMeanAbsRGB": 0.799,
    "topBottomMeanAbsRGB": 1.077
  },
  "suggestedTileMeters": 0.8,
  "metallicConstant": 0,
  "normalStrength": 0.75,
  "albedoCrop": {
    "boundsPixels": [
      0,
      42,
      1254,
      1212
    ],
    "coordinateOrder": "left, top, right, bottom"
  },
  "beforeEdgeDiagnostics": {
    "leftRightMeanAbsRGB": 4.607,
    "topBottomMeanAbsRGB": 3.29
  }
}
