{
  "title": "Raked White Plaster",
  "origin": "AI-generated with built-in image_gen; prepared by Locker3d",
  "date": "2026-11-21",
  "resolution": [
    1024,
    1024
  ],
  "license": "CC0-1.0, following the official Locker3d texture policy",
  "prompt": "Use case: photorealistic-natural\nAsset type: square diffuse / base-color texture data image for a PBR wall material, full bleed.\nPrimary request: a realistic freshly cured white raked plaster wall surface, finely combed in shallow continuous horizontal grooves. Photograph a 40 by 40 cm patch straight on, orthographic, uniformly sharp.\nMaterials/textures: chalk-white lime-gypsum-like plaster, matte and subtly granular, about 60 narrow parallel hand-combed groove pitches across the image height (approximately 6 to 7 mm per pitch). Fine grains and occasional tiny pores, slightly uneven ridge edges, natural restrained variation in groove width. All grooves are horizontal, almost straight, running through both side boundaries; no isolated swirls, large trowel patches, bricks, panels or seams. Keep shallow irregular hand-made furrows, not deep corrugated cladding.\nLighting: flat omnidirectional cross-polarized photographic material capture lighting, no directional shadow bands, no specular highlights, no brightness gradient, no dark vignette. Grooves read through minute material variation and soft neutral occlusion only, not dramatic dark stripes. Even exposure, light warm off-white plaster; no grey heavy shadows.\nComposition/constraints: only the flat material surface fills the entire square, no sphere, scene, tools, trim, text, watermark, frame or border. Make the field repeatable: same groove phase at opposite boundaries, grooves line up left to right, no special edge treatments. Irregular fine detail with little conspicuous repetition. Photographic realism, no stylized rendering, no painted brush marks, no cracks.",
  "maps": [
    {
      "file": "textures/albedo.png",
      "colorSpace": "sRGB",
      "bytes": 1775328,
      "sha256": "271c304765ab151a12aea34900c451a2d3bad64b15dd57405316b6a5a3cb969d"
    },
    {
      "file": "textures/normal-gl.png",
      "colorSpace": "Non-Color",
      "bytes": 1719466,
      "sha256": "5b138224a54dba37df6e8324e1477791e4a105a9485c2cbb4e65f22c13f19256"
    },
    {
      "file": "textures/roughness.png",
      "colorSpace": "Non-Color",
      "bytes": 329577,
      "sha256": "138137ec464513f6ef5543d3fdc790fdd21e16b46eefc3417598c76717fc659b"
    }
  ],
  "method": "Cropped the source to reduce pattern phase mismatch at tile edges. Albedo: periodic-plus-smooth decomposition via FFT Poisson solve to reduce edge mismatch. Normal: periodic multi-scale Gaussian bands, robust contrast normalization, material-specific cavity/joint masks and central-difference tangent-space gradients. Roughness: material preset plus local detail and joint variation. All data channels are estimates, not measured surface response.",
  "limits": "Not a photoscan. No AO, displacement or metallic maps. Generated images are not guaranteed seamless; inspect repetition at your target scale. No measured physical scale; demo scale is illustrative.",
  "edgeDiagnostics": {
    "leftRightMeanAbsRGB": 4.594,
    "topBottomMeanAbsRGB": 1.601
  },
  "suggestedTileMeters": 0.4,
  "metallicConstant": 0,
  "normalStrength": 0.65,
  "albedoCrop": {
    "boundsPixels": [
      1,
      84,
      1254,
      1244
    ],
    "coordinateOrder": "left, top, right, bottom"
  },
  "beforeEdgeDiagnostics": {
    "leftRightMeanAbsRGB": 9.802,
    "topBottomMeanAbsRGB": 5.886
  }
}
