About this texture

Aged Nickel Plating: finish and surface detail

Warm silver-gray metal with fine, softly mottled gray-taupe marks and scattered hairline handling scratches. The aging stays low in contrast across the surface. A broad light reveals a subdued metallic reflection.

Where to use this material

Use it on cabinet knobs, pulls, instrument housings and decorative trim. Place the fine marks at a scale that suits the hardware, and model bevels so the light can catch the edges. Add larger wear patches separately when a prop needs visible handling damage.

Keep the finish believable

Start at metallic 1, roughness 0.43 and normal strength 0.38. Compare the material under a broad area light and at a grazing angle. Keep the normal shallow so the fine aging reads through color and roughness. The shader is a visual finish study with estimated maps.

Texture scale and UV repeats

The Blender plane uses an illustrative 18 cm repeat. Compare the mottling with the size of a knob or screw head before applying it to a housing. On long trim, check whether the same scratch group repeats noticeably.

The example uses 0.18 m per full texture tile. This is an illustrative UV scale, not a measured physical capture. Inspect the repeat at your actual camera distance before covering a large surface.

Set up Aged Nickel Plating in Blender

Connect albedo.png to Base Color using sRGB. Use roughness.png and normal-gl.png as Non-Color data. Route the normal through a Normal Map node, starting at strength 0.38. Set metallic to 1. The downloadable scene packs all three images.

The base color is AI-generated, and normal and roughness are estimates. The material changes surface shading; it does not add silhouette geometry. The pack has no displacement, AO or metallic image. For an engine expecting DirectX normals, use an image editor to invert the normal map’s green channel. Follow the Blender texture setup guide for the node connections.

Compare related finishes

Shot-Blasted Aluminum · Reticulated Silver Sheet · Fine-Spangle Galvanized Sheet

Aged Nickel Plating: common questions

How can I make the plated surface look smoother?

Lower normal strength first and compare it under a large side light. Then adjust roughness around the starter value of 0.43 until the reflection fits the prop. Keep some roughness variation so the fine age marks stay visible.

Does this pack include a separate metallic map?

The scene uses a metallic constant of 1 across the finish. The three images are albedo, OpenGL normal and roughness. For chipped plating with visible substrate or deposits, add a mask and tune the two material regions separately.

Browse the metal texture library, the existing material library, or use the tile and offset checker to inspect repetition.